| Peer-Reviewed

Study of Kaolin for Synthesis of Aluminum Chloride

Received: 3 June 2013     Published: 10 July 2013
Views:       Downloads:
Abstract

Aluminum chloride enhanced polyacrylamide (AlCl3-PAM) hybrid polymer has been synthesized in this study. Aluminium chloride was synthesized with polyacrylamide via free radical solution polymerization to fabricate inorganic-organic hybrid polymer (AlCl3-PAM). A redox initiation system - (NH4)2S2O8 and NaHSO3 was used to initiate the polymerization at 50ºC in aqueous medium. Fourier Transform Infrared Spectrometer (FT-IR) was used to characterize aluminium chloride-polyacrylamide hybrid polymer by determining its functional groups exist in the hybrid polymer chain. Inorganic aluminium chloride salt was incorporated into the polyacrylamide to enhance the aggregation ability at kaolin particle interface. A physico-chemical method which is flocculation was used in this study to flocculate kaolin suspension. The effect of pH on the flocculation of kaolin suspension was studied between pH 5 to 7.5. The result showed the aluminium chloride-polyacrylamide (AlCl3-PAM) hybrid polymer was able to remove >99% of turbidity at pH 6.5 using 5 mg/L of dosage.

Published in American Journal of Chemical Engineering (Volume 1, Issue 2)
DOI 10.11648/j.ajche.20130102.11
Page(s) 36-39
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Aluminum Chloride, Flocculation, Kaolin, Polyacrylamide

References
[1] M. Natalia, and D. Olli. Environmental Implications of Aggragration Phenomena: Current Understanding. Current Opinion. Colloid Interface Science. 2006, 11 (4): 246-266.
[2] P. Somasundaran, V. Runkana, and P.C. Kapur. Flocculation and Dispersion of Colloidal Suspensions by Polymers and Surfactants: Experimental and Modeling Studies. Coagulation and Flocculation H. Stechemesser and B. Dobias, Second Edition. Marcel Dekker. Taylor & Francis. New York, 2005.
[3] Y. Wang, B.Y. Gao, Q.Y. Yue, J.C. Wei, J.C., and W.Z. Zhou, W.Z. Novel Composite Flocculent Polyferric Chloride-Polydimethyldiallylammonium chloride (PFC-PDMADAAC): Its Characterization and Flocculation Efficiency. Water Practice & Technology. 2006, 1 (3): 1-9.
[4] H. Tang, and B. Shi, B. The Characteristics of Composite Flocculants Synthesized with Inorganic Polyaluminium and Organic Polymers. In: Hermann H. Hahn, Erhard Hoffmann, Hallvard Odegaard (eds.), Chemical Water and Wastewater Treatment VII Proceedings of the 10th Gothenburg Symposium. Gothenburg, Sweden. 2002, 17- 28.
[5] W.Y. Yang, J.W. Qian, and Z.Q. Shen, Z.Q. A novel flocculant of Al(OH)3-polyacrylamide ionic hybrid. Journal of Colloid and Interface Science. 2004, 273 (2): 400-405.
[6] K.E. Lee, B.T. Poh, N. Morad,and T.T. Teng, T.T. Synthesis And Characterization Of Hydrophobically Modified Cationic Polyacrylamide Prepared From Low Concentration Of Cationic Monomer. Journal of Macromalecular Science Part A. 2009, 46 (3): 240-249.
[7] H. Yokoi, T. Obita, J. Hirose, S. Hayashi, and Y. Taksaki. Flocculation Properties of Pectin in Various Suspensions. Bioresource Technol. 2002, 84 (3): 287–290.
[8] S.S. Wong, T.T. Teng, A.L. Ahmad, A. Zhairi, and G. Najafpour. Treatment of Pulp and Paper Mill Wastewater by Polyacrylamide (PAM) in Polymer Induced Flocculation. J. Hazard Mater. 2006, 135: 378-388.
[9] L. Besra, D.K. Sengupta, S.K. Roy, and P. Ay. Influence of polymer adsorption and conformation on flocculation and dewatering of kaolin suspension. Sep. Purif. Technol. 2007, 37 (3): 231-246.
[10] N. Tekin, O. Demirbas, and M. Alkan. Adsortion of cationic polyacrylamide onto kaolinite. Micropor. Mesopor. Mat. 2012,85 (3): 340-350.
Cite This Article
  • APA Style

    Krishna Kumar, Omprakash Sahu. (2013). Study of Kaolin for Synthesis of Aluminum Chloride. American Journal of Chemical Engineering, 1(2), 36-39. https://doi.org/10.11648/j.ajche.20130102.11

    Copy | Download

    ACS Style

    Krishna Kumar; Omprakash Sahu. Study of Kaolin for Synthesis of Aluminum Chloride. Am. J. Chem. Eng. 2013, 1(2), 36-39. doi: 10.11648/j.ajche.20130102.11

    Copy | Download

    AMA Style

    Krishna Kumar, Omprakash Sahu. Study of Kaolin for Synthesis of Aluminum Chloride. Am J Chem Eng. 2013;1(2):36-39. doi: 10.11648/j.ajche.20130102.11

    Copy | Download

  • @article{10.11648/j.ajche.20130102.11,
      author = {Krishna Kumar and Omprakash Sahu},
      title = {Study of Kaolin for Synthesis of Aluminum Chloride},
      journal = {American Journal of Chemical Engineering},
      volume = {1},
      number = {2},
      pages = {36-39},
      doi = {10.11648/j.ajche.20130102.11},
      url = {https://doi.org/10.11648/j.ajche.20130102.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20130102.11},
      abstract = {Aluminum chloride enhanced polyacrylamide (AlCl3-PAM) hybrid polymer has been synthesized in this study. Aluminium chloride was synthesized with polyacrylamide via free radical solution polymerization to fabricate inorganic-organic hybrid polymer (AlCl3-PAM). A redox initiation system - (NH4)2S2O8 and NaHSO3 was used to initiate the polymerization at 50ºC in aqueous medium. Fourier Transform Infrared Spectrometer (FT-IR) was used to characterize aluminium chloride-polyacrylamide hybrid polymer by determining its functional groups exist in the hybrid polymer chain. Inorganic aluminium chloride salt was incorporated into the polyacrylamide to enhance the aggregation ability at kaolin particle interface. A physico-chemical method which is flocculation was used in this study to flocculate kaolin suspension. The effect of pH on the flocculation of kaolin suspension was studied between pH 5 to 7.5. The result showed the aluminium chloride-polyacrylamide (AlCl3-PAM) hybrid polymer was able to remove >99% of turbidity at pH 6.5 using 5 mg/L of dosage.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Study of Kaolin for Synthesis of Aluminum Chloride
    AU  - Krishna Kumar
    AU  - Omprakash Sahu
    Y1  - 2013/07/10
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ajche.20130102.11
    DO  - 10.11648/j.ajche.20130102.11
    T2  - American Journal of Chemical Engineering
    JF  - American Journal of Chemical Engineering
    JO  - American Journal of Chemical Engineering
    SP  - 36
    EP  - 39
    PB  - Science Publishing Group
    SN  - 2330-8613
    UR  - https://doi.org/10.11648/j.ajche.20130102.11
    AB  - Aluminum chloride enhanced polyacrylamide (AlCl3-PAM) hybrid polymer has been synthesized in this study. Aluminium chloride was synthesized with polyacrylamide via free radical solution polymerization to fabricate inorganic-organic hybrid polymer (AlCl3-PAM). A redox initiation system - (NH4)2S2O8 and NaHSO3 was used to initiate the polymerization at 50ºC in aqueous medium. Fourier Transform Infrared Spectrometer (FT-IR) was used to characterize aluminium chloride-polyacrylamide hybrid polymer by determining its functional groups exist in the hybrid polymer chain. Inorganic aluminium chloride salt was incorporated into the polyacrylamide to enhance the aggregation ability at kaolin particle interface. A physico-chemical method which is flocculation was used in this study to flocculate kaolin suspension. The effect of pH on the flocculation of kaolin suspension was studied between pH 5 to 7.5. The result showed the aluminium chloride-polyacrylamide (AlCl3-PAM) hybrid polymer was able to remove >99% of turbidity at pH 6.5 using 5 mg/L of dosage.
    VL  - 1
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Chemical Engineering, KIOT, Wollo University, Ethiopia

  • Department of Chemical Engineering, KIOT, Wollo University, Ethiopia

  • Sections